|
|
Home
GTWV070VHA00P
|
|
No Stock. Please call us for pre-orders +1-847-439-9020 (USA)
Item Number: GTWV070VHA00P
|
Image shown is a representation only.
The unit price on this page is only for evaluation sample orders on this online shop. (Up to 3 pieces)
Evaluation quantities (up to 3 pcs) are eligible to be shipped with an unsoldered 14 pin header sample.
For larger orders, please consult your nearest Noritake sales representative.
Overview
GTWV070VHA00P is suitable as an embedded monitor for a PC or Single Board Computer (SBC) with a digital video output (HDMI). GT-1P supports EDID and touch is HID-compliant (mouse or digitizer) so plug & play is possible.
HDMI interface accepts unencrypted video signal and sends 24-bit pixel data to display (audio and HDCP are not supported).
Power supply connector (CN7) is a JST SM05B-GHS-TB. Mating connector is a JST GHR-05V-S (connector housing) and a SSHL-002T-P0.2 (connector terminal).
Features
Digital Video Input Embedded Monitor
- 7" TFT (800 x 480 pixels)
- FLETAS® Metallized Projective Capacitive Touch
- HDMI digital video input
- Touch via USB (HID compliant)
- Serial Interface (UART & I2C) for settings
FLETAS® Metallized Projective Capacitive Touch (MPCT) Technology
- Adaptive sensitivity
(Works with thick cover glass, gloves, and up to 3 mm air gap)
- Stable operation
- Selectable touch detection method
- Multiple touches (10 maximum at dry condition)
- Glass screen (easily cleaned)
- Automatic calibration
- Software adjustable sensitivity
- Responsive with gloves and water spillage
- High signal-to-noise ratio
Useful Functions
- Simple commands to adjust brightness and touch
- EDID support
- Serial interface (UART & I2C) for settings
|
Specs
High Brightness
- A 1,000cd/m2 TFT panel is used.
*Actual brightness is 850cd/m2
Operation
- Power supply: DC 5V input
- Digital video input: HDMI
- Touch: USB and I2C (HID compliant)
Outer Dimension
Interface
- HDMI
- USB (High-speed/Full-speed)
- Async serial (3.3V CMOS)
- I2C (3.3V CMOS)
|
Further Details ►
Support Tools
GT-1 Pass: Adjust Touch Sensitivity and Backlight Brightness
- Works with Windows 8.1/10 (64 bit)
- Adjust touch sensitivity
- Adjust display (backlight) brightness
- Save adjusted display parameters to the GT module
|
GT-1P Control Center: Adjust Touch Sensitivity and Backlight Brightness
- Works with Embedded Linux (Like Raspbian)
- Adjust touch sensitivity
- Adjust display (backlight) brightness
- Save adjusted display parameters to the GT module
|
Accessories
Need connectors and/or cables with your LCD module?
Ask us about our Value Added Services.
Let us pre-assemble and inspect the quality for you.
We follow the IPC standards and nothing leaves the door unless the quality meets class 2 or higher.
Not only can you cut down on the extra cost associated with subcontracting the secondary operation,
it's one less thing you have to worry about.
Contact us with your specifications ►
|
Product Reviews
|
|